D-Fi Usb Connectivity - Chauvet DJ SlimPAR Q6 ILS Quick Reference Manual

EN
Menu Map
Refer to the SlimPAR Q6 ILS product page on
Main Level Programming Levels
4-Ch
9-Ch
iLS
C--
(Static color)
P--
(Automatic
program)
S--
Snd
(Sound-
active)
SEnS
u--
(Custom
color)
diN
(Dimmer
speed)
SEr
(Infrared)
DMX Linking
The SlimPAR Q6 ILS can work with a DMX controller. Instructions for connecting and configuring this product for DMX
operation are in the User Manual. If you are not familiar with DMX, download the DMX Primer from www.chauvetdj.com.
Starting Address
To ensure full access to all channels available in each DMX mode, the highest recommended DMX address is 504.
Master/Slave Connection
The SlimPAR Q6 ILS uses the DMX data connection and ILS for its Master/Slave mode. Information about configuring the
SlimPAR Q6 ILS for Master/Slave operation is in the User Manual, which is available from the Chauvet website.
ILS Connection
The SlimPAR Q6 ILS uses the DMX data connection and the D-Fi USB for wireless connection to the Integrated Lighting
System (ILS) ecosystem (patent pending). For more information about configuring the SlimPAR Q6 ILS into ILS mode,
please refer to the User Manual available at www.chauvetdj.com.
IRC-6
The SlimPAR Q6 ILS can be operated with the CHAUVET IRC-6. For more information about the IRC-6, download
instructions for the IRC-6 or the SlimPAR Q6 ILS User Manual from www.chauvetdj.com.

D-Fi USB Connectivity

The SlimPAR Q6 ILS is able to become a D-Fi wireless receiver/transmitter with the use of the D-Fi USB from CHAUVET
DJ. Simply set the DIP switch D-Fi receiving/transmitting channel, plug it into the USB port then set the product's DMX
Personality and DMX Address. Further instructions for connecting and configuring this product for D-Fi USB operation
are in the User Manual.
WARNING! DO NOT plug anything other than a D-Fi USB into the USB port. Doing so may cause
damage to the product.
Once plugged in, the D-Fi USB will take over the product. Wired DMX and manual display control/menu
buttons will be unavailable until you unplug the D-Fi USB. The priority levels are:
1. D-Fi USB
2. Wired DMX
3. IRC-6 Remote Control
4. Manual Digital Display/Menu Buttons
3
QUICK REFERENCE GUIDE
www.chauvetdj.com
Description
d 1–509 4-channel DMX mode
d 1–504 9-channel DMX mode
iLS1–4 Sets ILS mode
1: Red
2: Green
C 1–19 3: Blue
4: Amber
5: Cyan
P 1 4-color snap
P 2 4-color pulse
P 3 19-color snap
P 4 19-color fade
S. 1–100 Automatic program speed
Snd1 4-color snap
Snd2 19-color snap
u 0–100 Sound sensitivity
r. 0–255
G. 0–255
Combine red, green, blue, and amber for a custom static color
b. 0–255
A. 0–255
oFF
diN1
Sets the dimmer speed
diN2
diN3
oFF
Enables/disables infrared control
on
for the latest menu map.
6: Magenta 11: Sky
7: Yellow 12: Hot pink
8: Orange
13: Sea foam
green
9: Lime
10: Lavender 14: Salmon
15: Pink 18: Peach
19: White
16: Powder
blue
17: Bright
yellow
SlimPAR Q6 ILS QRG Rev. 2