General Leaf Tips - Kodak AFi 10 Release Note

Leaf Capture version 11.2.6
Release Notes

General Leaf Tips

Opening Images in Third Party Applications
To open images taken in portable mode in third party applications, follow this
workflow:
Open the files in Leaf Capture.
Click Save or Save As to save the files.
Open the files in the third party application.
Using your CF Card in Multiple Imaging Modules
When using a CF card in multiple imaging modules, it is recommended that you
perform a quick format each time you switch the card between imaging modules.
Switching Between Shooting Modes
When switching from portable to tethered mode, wait for the CF card icon to stop
running before connecting the FireWire cable to your computer.
When tethered, eject the CF card via the Apple
disconnect the FireWire cable only when the connect icon
Using a Second Battery with Your Leaf AFi/AFi-II Imaging Module
If you are using a second battery on the Leaf AFi or AFi-II imaging module, you
must manually switch off the imaging module in the following circumstances:
When you shut down the Leaf AFi or AFi-II camera system
When the camera system enters power save mode
Conserving Battery Power
Working in mirror-up mode can consume a lot of battery power. To conserve
your batteries, minimize the time you work in mirror-up mode.
Locating the Leaf Tables
The Leaf tables are located under Leaf Images > Leaf Tables in the Pictures
folder of each user.
® ®
Macintosh desktop, and
is green.
6