Table of Contents
Advertisement
Leaf Capture version 11.2.6
Release Notes
File Names Including Forward Slash Character
When processing images with the forward slash "/" character in the file name,
the Leaf Capture software stops responding. Do not use this character in file
names.
Misleading Message After Reconnecting After Shooting with a
Custom Lens Calibration File
When you disconnect the imaging module from the Leaf Capture software by
way of clicking disconnect or closing Leaf Capture, but not physically
disconnecting the FireWire cable, the custom lens calibration file is still loaded in
the imaging module.
Upon reconnection, the imaging module searches for the custom lens calibration
file on your computer. If you changed the location or name of the custom lens
calibration file, a message appears warning you that it cannot locate the custom
lens calibration file, and that it will use the default lens calibration file.
However, for as long as the imaging module is not physically disconnected, it
retains the custom lens calibration file in its memory, and continues to use the
custom lens calibration file until you load a new file, or until you physically
disconnect the imaging module by removing the FireWire cable.
Workaround: If you want to use the default lens calibration file, either disconnect
and reconnect by physically removing and replacing the FireWire cable, or
reload the default lens calibration file.
Moving Folders in the Browse Tree
After you move folders in the Browse panel directory area, the contents of the
moved folder are not displayed.
Workaround: To view the folder's contents, select another folder and then select
the folder that you are working on.
Proofing Output Color at a Magnification Greater Than 70%
If you select a CMYK print space or a limited gamut RGB working space on the
Process panel's Color tab, the correct color is displayed in the Detail pane or in
the Preview area only when the image is magnified at a level greater than 70%.
Workaround: To proof output color, view the image in the Detail pane or Preview
area at a magnification level greater than 70%.
Help System
At this time, the help system is available only in English.
9
Advertisement
Table of Contents
