Leaf Capture version 11.2.6
Release Notes
Computer Restarts After Installation
If a driver that is new to your computer is installed during the Leaf Capture
version 11.2.6 software installation, Leaf Capture restarts your computer at the
end of the installation. If you are working in other applications, make sure you
save your work first.
Updating the Imaging Module Firmware
When you connect your imaging module to the Leaf Capture software, the
following message appears:
Click OK. The imaging module firmware is updated.
This process takes approximately 10 minutes.
After uploading the firmware, turn the imaging module off and on again.
Preferences are Reset After Installation
The installation automatically resets your Leaf Capture preferences.
Note: If you have multiple user accounts, the preferences are reset only for the
user who installs the Leaf Capture software. All other users must manually reset
their preferences:
Locate Applications > Leaf Capture 11 > Utilities, and double-click Reset
Preferences.
5