Wireless Network Connection; Status Lights - Kodak EasyShare Photo Printer 500 User Manual

Wireless network connection

Problem
Photo printer cannot
connect to the network

Status lights

Print button/light
Light status
Light glows steady
green
Light blinks green
www.kodak.com/go/support
Cause and/or solution
A Kodak Wi-Fi card is not inserted or is not fully inserted. Reinsert
the Wi-Fi card (page
Check the power connections.
Make sure the wireless router and network are running before
the photo printer begins scanning for a network.
Out of range of the Wi-Fi signal. Make sure the photo printer is
located within the operating range of the Wi-Fi wireless network.
The photo printer network settings are incorrect. Using the Wi-Fi
wireless configuration utility on your computer, change the
settings to match those of the network.
See the Wi-Fi wireless configuration utility Help for details.
There is interference in the wireless signal (such as a microwave
oven). Wait until there is no interference, then try again.
Cause
The photo printer is ready for
printing.
The photo printer is printing.
29).
Action/solution
None required.
Troubleshooting
43