Table of Contents
Advertisement
6
en | Safety
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
1.4
Warning notices
This product relies on the building's installation for short-circuit (overcurrent) protection.
Ensure that a fuse or circuit breaker no larger than 120 VAC, 20A U.S. (240 VAC, 16A
international) is used on the phase conductors (all current-carrying conductors).
Warning!
High leakage current. Earth connection essential before connecting supply.
!
Warning!
To prevent personal injury or damage to the unit, never attempt to lift or tilt the unit using the
!
handles of controller modules, power supplies, fans, and so on. These types of handles are
not designed to support the weight of the unit.
Warning!
An electrical outlet that is not correctly wired could place hazardous voltage on metal parts of
!
the system or the devices that attach to that system. It is the customer's responsibility to
ensure that the outlet is correctly wired and grounded to prevent an electrical shock.
2020.09 | V2 | DOC
–
The device performance is noticeably changed.
Installation of the unit must comply with local and national electrical codes.
Cluster media converters must be installed in a restricted access location.
When installing the unit into a movable cabinet or rack, install from the bottom up for
best stability.
Use only manufacturer's supplied power cords and cables with manufacturer equipment.
DC-based systems must be installed in a restricted access location and the two input
power terminals for the DC power supply must be connected to separate isolated branch
circuits.
A qualified service person is required to make the DC power connection according to
local and national electric codes / guidelines.
Ensure your DC mains supply is earthed at the point of generation per IEC 60950-1.
To reduce the risk of personal injury or equipment damage, allow internal components
time to cool before touching them.
Ensure that the equipment is properly supported or braced when installing options.
This equipment is designed for connection to a grounded outlet. The grounding type plug
is an important safety feature. To avoid the risk of electrical shock or damage to the
equipment, do not disable this feature.
Risk of electrical shock - If there is evidence of fire, water, or structural damage, never
turn on the power to the equipment.
Risk of electrical shock - Before removing or installing a power supply, turn off the power
switch, and unplug the power cord.
Pinching hazard - As you push the canister into the slot, ensure that your fingers are not
pinched between the lever and the canister. The lever automatically moves toward the
closed position as the canister is pushed into its slot.
Do not remove more than one canister from the enclosure while power to the enclosure
is turned on.
Bosch products may contain Class 1 laser devices, Class 1M laser devices, or both.
Keep away from moving fan blades.
Do not use equipment in the cabinet as a shelf or work space.
Quick Installation Guide
DSA E-Series (E2800 12-bay)
Bosch Security Systems B.V.
Advertisement
Table of Contents
