Maintenance
Maintenance
Sensors
Sensors
If the dust sensor lamp is abnormal (P. EN15), rubbish
or dust may adhere to the sensor part (2 places) inside
the body. Please perform maintenance.
Use a soft, dry cloth to wipe the attached rubbish,
dust, etc. from the front end
Pre fi lter
Pre fi lter
Tap lightly to remove rubbish, dust, etc., or gently wash
and dry thoroughly.
• Do not miss the pre fi lter after cleaning
Remove rubbish from the plug with a dry cloth
Plug of the battery charger
EN12
Sensors
Body, extension wand etc.
Body, extension wand etc.
Wipe up dirt, dust, etc. with a wrung soft and
damp cloth.
Terminal
Terminal
Terminal of the fl oor nozzle
Sensors
About 6 cm
Terminal of the extension wand