Auto On Hook - ClearSounds v407 Installation Manual & User Manual

2. The screen will display "DIALED", the last number dialed, the total of numbers, the
date and the hour of record.
3. Using the
number you wish to dial.
4. Lift the handset or press the SPKR button, the number will be automatically dialed.
To delete one of telephone numbers, follow instructions below:
In the hook position,
1. Press the OK button.
2. The screen will display "DIALED", the last number dialed, the total of numbers, the
date and the hour of record.
3. Using the
number you wish to delete.
4. Press the C button.
5. The Screen will display "DEL?"
6. Press again the C button to confirm.
7. Press the OK button to exit.

AUTO ON HOOK

When the Auto On Hook feature is ON, Your ClearSounds CSC50 will automatically dis-
connect the line after 5 - 8 minutes if the phone is left off the hook. This will restore your
line to be able to receive another call even if you leave the handset off the base.
In the hook position,
1. Press the MUTE button to access the Programming Menu.
2. Using the
OK button to confirm.
3. Using the
press the OK button.
4. Using the arrow buttons, choose <<ON>> or <<OFF>>.
5. Press the OK button.
6. Press the C button twice to exit.
No dial tone
1. Check that all phone cord connections (including the curly cord) and AC Adapter are
securely plugged into the telephone & wall jack.
2. Check that the phone is in the correct dialing mode, Touch-Tone / Pulse Setting.
3. Plug another phone into the jack to make sure your phone service is functioning
properly.
or arrow buttons, scroll through the numbers and select the
or arrow buttons, scroll through the numbers and select the
or arrow buttons, highlight <<SET PHONE>> then press the
or arrow buttons, scroll to select <<AUTO ON HOOK>> and
Troubleshooting Guide
31