Technical Data - BorMann BFN6100 Manual

Hide thumbs

Table Of Contents

Table of Contents

3. Hang the motor on the suspension for wiring. The remote control receiver connects the motor

power line: the black wire L of the motor is connected in the black wire of the remote control

receiver terminal, the blue wire L-LIHT of the motor is connected in the blue-black wire of the remote

control receiver terminal, and the white wire N of the motor is connected in the white wire of the

remote control receiver terminal.

4. The remote control receiver is placed in the suction cup, and then fastening connection between

motor and suspension.

6. The lamp is connected with the motor, and the fast terminal is used to connect the

lamp.

Technical Data

Model:

BFN6100

Voltage/Freq:

220V/50Hz

110V/60Hz

Power:

50W

Bulb Holder Type: E27

Diam:

107cm

* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes

significantly affect the performance and safety of the products. The parts described / illustrated in the pages of the manual that you hold in your hands may

also concern other models of the manufacturer's product line with similar features and may not be included in the product you just acquired.

* Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is

used in commercial, trade or industrial businesses or for equivalent purposes.

* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and

special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer.

7. Install E27 40w bulb and glass at last.

BFN6200

BFN6300

220V/50Hz

110V/60Hz

50W

E27

76cm

107cm

WWW.BORMANNTOOLS.COM

5. Connect the fan blade and fork, fasten on the motor