Technical Data - BorMann Elite BFN6110 Quick Start Manual

EN

Technical Data

Voltage/Frequency:
Power:
Fan blade diameter:
Lamp socket type:
5
4. When all connections are complete, carefully attach the top cover (cup) and secure it to the base by tightening
the screws around it. Make sure that the protrusion of the inner "tooth" hole of the cover is within the recess of
the plastic part of the hanger.
Ensure that you have secured the electric motor system securely to the suspension system.
5. Unscrew the screws located around the perimeter of the bottom cover to gain access to the blade
connection mounts. Rotate the rotating part of the motor until the oval opening aligns with the con-
nection holes and secure them to the base using the screws provided. Attach all the blades following
the same procedure.
Make sure the blades are attached securely and then replace the bottom cover and tighten all screws
securely.
7. Connect an E27 40w type lighting bulb and then fit the supplied bulb cover.
220~240V 50/60Hz
50W-70W
120cm
E27
WWW.BORMANNTOOLS.COM
Control device
* The manufacturer reserves the right to make minor changes to product design and technical specifications without
prior notice unless these changes significantly affect the performance and safety of the products. The parts described /
illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer's
product line with similar features and may not be included in the product you just acquired.
* Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our
warranty will be voided if the machine is used in commercial, trade or industrial businesses or for equivalent purposes.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replace-
ment work, including maintenance and special adjustments, must only be carried out by technicians of the authorized
service department of the manufacturer.
Locking screw
Locking shaft and
Shaft Retaining Clip