How to Spray
How to Spray
The turbine motor generates sparks.
These sparks can ignite flammable fumes.
•
Keep sprayer in a well ventilated area.
•
Keep sprayer at least 20 feet (6m) from
spray area. Use additional hose if
necessary.
Take a few moments prior to spraying and
review these tips to ensure your spraying
project is a success.
Adjust Spray Pattern
Set air cap to position for spray pattern
desired.
ti30977a
Adjust Flow and Pattern Size
Edge II (Model 17R236)
Flow and pattern size is determined by how
far trigger is pulled.
16
Edge II (Model 17R351)
Fluid/Air Control:
Flow and pattern size is determined by
adjustment to the Fluid/Air control knob. Set
knob to OFF. Increase flow until desired finish
is attained.
Edge II Plus
Flow and pattern size is determined by
adjustment to the Fluid, Air and Pattern Size
controls.
Edge II Plus
Pattern
Size
ti31144a
ti30978a
Air Control
Fluid Control
ti30979a
3A5097D