Advertisement
Plug in the power cord, then press the main power switch to turn on the unit. The unit is now in standby
mode and ready for the current day and time to be set.
Setting the current time and day:
1
Press the Timer
the current day of the week (D1-D7), with "D1" being Monday, "D2" being Tuesday, and so on. Click the
Timer
button again to confirm the entry for the current day.
2
Once you have confirmed the day, the 00 display will flicker again. Click FAN and OSCILLATION (
adjust the current hour (24 hr. clock). Click the Timer
the day.
3
Once you have confirmed the hour, the 00 display will flicker again. Click FAN and OSCILLATION (
adjust the current minutes (0-59). Click the Timer
current time.
Setting up weekly operation:
1
Press the Flame
days of the week. Stop on the day you wish to program and wait for the display to stop flashing.
2
Click the Heater
Click FAN and OSCILLATION(
temperature is set.
Click the Brightness
3
and OSCILLATION (
flicker again. Click FAN and OSCILLATION (
confirm the minute.
Click the Speed
4
FAN and OSCILLATION (
will flicker again. Click FAN and OSCILLATION (
confirm the minute.
To complete the weekly program setup, press and hold the Timer
5
your selections display for 5 seconds each, starting with the hour, followed by the minute, and then the
temperature.
Note:
•
To see your weekly settings again later, press and hold the Flame
•
To cancel your weekly settings, press and hold the Heater
42MM712 UKREV.1
Current and Weekly Settings
button to confirm, The 00 display will flicker. Click FAN and OSCILLATION (
button. The 00 display will flicker. Press the Flame
button to adjust the thermostat setting for your selected day. The 00 display will flicker.
) to adjust the desired temperature. When the display stops flashing, the
button to select the startup time of the heater. The 00 display will flicker. Click FAN
) to adjust the hour. To confirm the hour, click the Timer
button to select the end time for running the heater. The 00 display will flicker. Click
) to adjust hour. To confirm the hour, click the Timer
button to confirm the entry for the current hour of
button again to confirm the entry for the minute of the
) to adjust the minute. Click the Timer
) to adjust the minute. Click the Timer
button for 3 seconds. You will then see
button for 3 seconds.
button for 3 seconds in standby mode.
34
button again to cycle though the
button. The 00 display will
button again to
button. The 00 display
button again to
),to adjust
) to
) to
Advertisement
