Smeg ST4512IN User Manual
  1. Manuals
  2. Brands
  3. Smeg Manuals
  4. Dishwasher
  5. ST4512IN
  6. User manual

Smeg ST4512IN User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
EN
User Manual
Dishwasher
ST4512IN

Advertisement

Table of Contents
loading

Related Manuals for Smeg ST4512IN

Summary of Contents for Smeg ST4512IN

  • Page 1 User Manual Dishwasher ST4512IN...

  • Page 2: Table Of Contents

    General information and tips Environmental information VISIT OUR WEBSITE TO: Get usage advice, brochures, trouble shooter, service and repair information: www.smeg.com/services/customer-service Subject to change without notice. SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage.
  • Page 3 Children between 3 and 8 years of age and persons with • very extensive and complex disabilities shall be kept away from the appliance unless continuously supervised. Children of less than 3 years of age should be kept away • from the appliance unless continuously supervised.

  • Page 4: Safety Instructions

    The appliance is to be connected to the water mains using • the new supplied hose-sets. Old hose sets must not be reused. SAFETY INSTRUCTIONS Installation • Connect the mains plug to the mains socket only at the end of the WARNING! Only a qualified installation.
  • Page 5 complete. Some detergent may remain that not all spare parts are relevant for on the dishes. all models. • Do not store items or apply pressure on • The following spare parts will be the open door of the appliance. available for 10 years after the model •...

  • Page 6: Product Description

    PRODUCT DESCRIPTION Upper spray arms Cutlery basket Lower spray arm Lower basket Filters Upper basket Rating plate The graphic is a general overview. For more details, Salt container refer to other chapters or Air vent documents provided with the Rinse aid dispenser appliance.

  • Page 7: Programmes

    Indicators Indicator Description Drying phase indicator. It is on when you select a programme with the drying phase. It flashes when the drying phase operates. Salt indicator. It is on when the salt container needs refilling. It is always off while the programme operates.

  • Page 8: Settings

    Consumption values Water Energy Duration 1) 2) Programme (kWh) (min) 0.779 10.5 - 12.8 0.888 - 1.086 9.5 - 11.7 0.713 - 0.871 8.7 - 10.6 0.542 - 0.663 2.9 - 3.6 0.012 - 0.015 1) The pressure and the temperature of the water, the variations of the mains supply, the options, the quantity of dishes and the degree of soil can change the values.
  • Page 9 The higher the content of these minerals, flashes and the indicators the harder your water is. Water hardness is measured in equivalent scales. are on. The water softener should be adjusted The water softener according to the hardness of the water in your area.
  • Page 10 How to set the water softener Water softener Amount of water level level Make sure the appliance is in user mode. 1. Wait until the indicator starts to flash, the indicator continues to flash and the remaining indicators are off. The intermittent flashing of the indicator In case of the high water softener setting, shows the current setting: e.g.
  • Page 11 There is also an acoustic signal that The indicator shows the current sounds when the programme is setting: completed. By default this acoustic signal • is on = Rinse aid empty is deactivated but it is possible to activate notification is on. •...

  • Page 12: Before First Use

    1. Press the programme button four CAUTION! Do not try to close times. the appliance door within 2 The indicator starts to flash. minutes after automatic opening. This can cause 2. Wait until the indicator continues to damage to the appliance. flash and the remaining programme indicators are off.

  • Page 13: Daily Use

    CAUTION! The compartment (C) is for rinse aid only. Do not fill it with detergent. CAUTION! Only use rinse aid designed specifically for dishwashers. 1. Press the release element (A) to open the lid (B). 2. Pour the rinse aid in the dispenser (C) 4.
  • Page 14 Make sure that the appliance is in Do not fill the compartment (A) programme selection mode. with more than 30 ml of gel • If the salt indicator is on, fill the salt detergent. container. • If the rinse aid indicator is on, fill the Setting and starting a rinse aid dispenser.

  • Page 15: Hints And Tips

    Make sure that there is detergent in the If the door is opened for more detergent dispenser before you start a than 30 seconds during the new programme. drying phase, the running programme ends. It does not The Auto function happen if the door is opened by Dry Assist function.
  • Page 16 What to do if you want to stop offers the most efficient use of using multi-tablets water and energy consumption. • To prevent limescale buildup inside the Before you start to use separately appliance: detergent, salt and rinse aid, complete the –...

  • Page 17: Care And Cleaning

    Before starting a programme • The correct quantity of detergent is used. Before you start the selected programme, make sure that: Unloading the baskets • The filters are clean and correctly 1. Let the tableware cool down before installed. you remove it from the appliance. Hot •...
  • Page 18 5. Make sure that there are no residues 1. Turn the filter (B) counterclockwise of food or soil in or around the edge of and remove it. the sump. 6. Put back in place the flat filter (A). Make sure that it is correctly positioned under the 2 guides.
  • Page 19 Cleaning the upper spray arms CAUTION! An incorrect position of the filters can cause We recommend to clean the upper spray bad washing results and arms regularly to prevent soil from damage to the appliance. clogging the holes. Clogged holes can cause unsatisfactory washing results.

  • Page 20: Troubleshooting

    and fix it in the duct by turning it counterclockwise. Make sure that the mounting element locks into place. 4. To install the spray arm back, insert the mounting element in the spray arm TROUBLESHOOTING to contact an Authorised Service WARNING! Improper repair of Centre.
  • Page 21 Problem and alarm code Possible cause and solution The appliance does not fill with water. • Make sure that the water tap is open. • Make sure that the pressure of the water supply • The indicator flashes 1 time in‐ is not too low.
  • Page 22 Problem and alarm code Possible cause and solution Technical malfunction of the appliance. • Switch the appliance off and on. • The indicator flashes 12 times intermittently. • Acoustic signal sounds 12 times in‐ termittently. The level of water inside the appliance •...
  • Page 23 WARNING! We do not recommend using the appliance until the problem has been completely fixed. Unplug the appliance and do not plug it in again until you are certain that it operates correctly. The dishwashing and drying results are not satisfactory Problem Possible cause and solution Poor washing results.

  • Page 24: Technical Information

    Problem Possible cause and solution Traces of rust on cutlery. • There is too much salt in the water used for washing. Refer to "The water softener". • Silver and stainless steel cutlery were placed together. Do not place silver and stainless steel items close to‐ gether.

  • Page 25: Environmental Concerns

    Capacity Place settings 1) Refer to the rating plate for other values. 2) If the hot water comes from alternative source of energy (e.g. solar panels), use the hot water supply to de‐ crease energy consumption. Link to the EU EPREL database EPREL database using the link https:// eprel.ec.europa.eu and the model name The QR code on the energy label supplied...
  • Page 28 156803312-A-432021...

Table of Contents