Subscribe to Our Youtube Channel
Related Manuals for ClearOne MAXTM EX Telephone
Summary of Contents for ClearOne MAXTM EX Telephone
- Page 1 MAX™ EX Installation & Operation Manual ClearOne Communications, Inc. ~ 5225 Wiley Post Way, Salt Lake City, UT 84116 ~ tel 1-800-945-7730 ~ fax 1-800-933-5107 Printed in China.
-
Page 2: Table Of Contents
Setting up the MAX EX conferencing phone is extremely easy and requires only three connections: power, telephone line and the base unit to the conferencing phone. And, the familiar keypad design ensures users will be comfortable using the phone, reducing the need for training and support. -
Page 3: Introduction
If the product has been dropped or damaged. e. If the product exhibits a distinct change in performance. • Avoid using a telephone during an electrical storm. There may be a remote risk of electric shock from lightning. • Do not use this product to report a gas leak in the vicinity of the leak. -
Page 4: Getting Started
1. Connect one end of the telephone cable into the phone jack on the back of the 2. Connect the converter's power adapter into an electrical outlet. 3. Connect a second telephone cable from the converter to a digital or PBX phone. -
Page 5: Using Your Max Ex Conferencing Phone
Using your MAX EX conferencing phone To make a call 1. Press the key. You will hear a dial tone. ON/OFF 2. Dial the number as you would on a standard phone. The number appears on the LCD Figure 5. Dialing screen screen. -
Page 6: User Options
To send a Flash signal If your telephone service includes call transfer, call waiting, or conference calling, you can use the Flash key. Refer to your local telephone service for details. -
Page 7: Tones And Alerts
To program local phone number 1. Press and hold until the Program icon appears on the LCD screen. REDIAL/PROG 2. Press to enter the user phone number menu. 3. Press REDIAL/PROG 3. Enter the local phone number. 4. Press to save the number. Press REDIAL/PROG CLEAR Note: Press &... -
Page 8: Maintenance
It could be that Try this Base unit is not Connect the base unit to the connected to telephone telephone jack using the jack. supplied telephone cable. You are not using an Check that you are using an analog phone line. -
Page 9: Appendix
If requested, this information must be provided to your telephone company. The REN is used to determine the quantity of devices, which may be connected to the telephone line. Excessive RENs on the telephone line may result in the devices not ringing in response to an incom- ing call. -
Page 10: Warranty
Department does not guarantee the equipment will operate to the user's satisfaction. The REN is used to determine the quantity of devices, which may be connected to the telephone line. Excessive RENs on the telephone line may result in the devices not ringing in response to an incoming call.
Need help?
Do you have a question about the MAXTM EX Telephone and is the answer not in the manual?
Questions and answers