Table of Contents
Advertisement
cycles of CAS latency depends on the DRAM timing. We rec-
ommend that you leave this item at the default value.
Bank Interleave (Disabled)
Enable this item to increase memory speed. When enabled,
separate memory banks are set for odd and even addresses
and the next byte of memory can be accessed while the cur-
rent byte is being refreshed.
Press <Esc> to return to the Advanced Chipset Features page.
AGP & P2P Bridge Control
Scroll to this item and press <Enter> to view the following
screen:
CMOS Setup Utility – Copyright (C) 1984 – 2001 Award Software
AGP Aperture Size
AGP Mode
AGP Driving Control
x
AGP Driving Value
AGP Fast Write
AGP Master 1 WS Write
AGP Master WS Read
↑ ↓ → ← : Move Enter : Select
F5:Previous Values
AGP Aperture Size (64 MB)
This item defines the size of the aperture if you use an AGP
graphics adapter. The AGP aperture refers to a section of the
PCI memory address range used for graphics memory. We
recommend that you leave this item at the default value.
AGP Mode (4X)
This item allows you to enable or disable the caching of dis-
play data for the processor video memory. Enabling AGP-4X
Mode can greatly improve the display speed. Disable this item
if your graphics display card does not support this feature.
AGP Driving Control (Auto)
This item is used to signal driving current on AGP cards to
auto or manual. Some AGP cards need stronger than normal
AGP & P2P Bridge Control
[64M]
[4X]
[Auto]
DA
[Disabled]
[Disabled]
[Disabled]
+/-/PU/PD:Value:
F10: Save ESC: Exit
F6:Fail-Safe Defaults
45
Item Help
Menu Level
F1:General Help
F7:Optimized Defaults
Advertisement
Table of Contents
