Disassembly - Pioneer AVH-P4400BH/XUUC Service Manual

1

7. DISASSEMBLY

- Method for opening the flap manually (Fig.1)
A
Insert a tip of screwdriver whose diameter is
approximately 2mm into the slit at the bottom surface
of the product and slide the flame part to the direction
indicated by an arrow.
B
- Removing the Monitor Assy (Fig.2)
1
Remove the two screws.
C
2
Pull out the Monitor Assy in the direction
indicated by an arrow.
D
Reverse the top and bottom of the product.
3
Push the two tabs and then remove the Cover.
4
Disconnect the Connector and then remove
the Monitor Assy.
E
F
72
1
2
1
3
AVH-P4400BH/XUUC
2
3
2
Monitor Assy
Cover
3
4
Monitor Assy
3
4
Fig.1
1
Fig.2
4