Abit AB-CX6 User Manual page 68

3-34
time counting.
Primary IDE 0 / Primary IDE 1:
Two options are available: Enabled and Disabled. The default setting is Disabled. If any
primary IDE master/slave I/O activity occurs, it will cause the computer to re-count the
time elapsed.
Secondary IDE 0 / Secondary 1:
Two options are available: Enabled and Disabled. Default setting is Disabled. If any
secondary IDE master/slave I/O activity occurs, it will cause the computer to re-count
the time elapsed.
FDD, COM, LPT Port:
Two options are available: Enabled and Disabled. Default setting is Enabled. If any
floppy disk, COM ports and Parallel port I/O activity occurs, it will cause the computer
to re-count the time elapsed.
PCI PIRQ[A-D]#:
Two options are available: Enabled and Disabled. Default setting is Disabled. If any
INTA~INTD signal activity occurs, it will cause the computer to re-count the time
elapsed.
CX6
Chapter3