Abit AB-CX6 User Manual page 19

Installing the Motherboard
Fig. 2-3 Direct RDRAM module
Fig. 2-4 Continuity module
The following procedure will show you how to install a RIMM module into a RIMM socket.
Figure 2-5 Memory module instllation
Step 4. Locate your computer's 184-pin memory expansion RIMM socket.
Step 5. Insert the RIMM module into the expansion socket as shown in the illustration.
Note how the module is keyed to the socket. You can refer to figure 2-5 for the
details. This insures the RIMM module will be plugged into the socket in one way
only. Firmly press the RIMM module into the RIMM socket, making certain the
module is completely seated in the RIMM socket.
Step 6. Once the RIMM module has been installed, the installation is complete and the
computer's cover can be replaced. Or you can continue to install other devices and
add-on cards that are mentioned in the following section.
Unlike installing SIMMs, RIMMs
may be "snapped" directly into the
socket. Note: Certain RIMM sockets
have minor physical differences. If
your module doesn't seem to fit, please
do not force it into the socket as you
may damage your memory module or
RIMM socket.
Step 1. Before you
memory module, please place the
computer power switch in the off
position and disconnect the AC power
cord from your computer.
Step 2. Remove the
chassis cover.
Step 3. Before touching
electronic components, make sure you
first touch an unpainted, grounded
metal object to discharge any static
electricity stored on your clothing or
body.
2-5
install the
computer's
any
User's Manual