Abit AB-CX6 User Manual page 66

3-32
V/H SYNC + Blank: This selection will cause the system to turn off the vertical and
DPMS:
Video Off In Suspend:
Two options are available: Yes or No. The default setting is Yes. This item determines the
manner in which the monitor is blanked.
Suspend Type:
Two options are available: Stop Grant and PwrOn Suspend. The default setting is Stop
Grant.
Modem Use IRQ:
You can specify the IRQ for modem use. Eight options are available: N/A . 3 . 4 . 5 .
7 . 9 . 10 . 11. The default setting is N/A.
Suspend Mode/HDD Power Down:
These two items will be enable to change setting when item Power Management is set to
User Define, theses two item will also changes as table 3-6-3 below.
Table 3-6-3: Power Management Settings
Items
Suspend Mode
HDD Power Down Disabled . 1 Min . 2 Min . 3 Min
CX6
horizontal synchronization ports and write blanks to the video buffer.
Initial display power management signaling.
Power Management Settings
User Define
Disabled . 1 Min . 2 Min . 4 Min
. 8 Min . 12 Min . 20 Min . 30
Min . 40 Min . 1 Hour. The default
setting is Disabled.
. 4 Min . 5 Min . 6 Min . 7 Min
. 8 Min . 9 Hour . 10 Min . 11
Min . 12 Min . 13 Min . 14 Min .
15 Min. The default setting is Disabled.
Chapter3
Min Saving Max Saving
1 Hour 1 Min
15 Min 1 Min