Kodak DCS Pro 14n Quick Start Manual page 2

Back/Side/Bottom
Exposure Mode dial
Flash Sync button
Auto Exposure
Bracketing button
Image LCD
Menu button
Nav+ button
HotKey button
Digital Status button
Delete button
Tag/Record button
Media door
Microphone
Viewfinder
Reference circle
(Center-Weighted metering)
Focus brackets
(Spot metering area)
Focus Area
Focus indicator
Metering system
Shutter speed
Aperture
Hot Shoe
Viewfinder eyepiece
Top Status LCD
LCD illuminator
AE-L/AF-L button
Main Command dial
OK button
Cancel button
Four-way switch
Four-way switch lock
Vertical Shutter release
SD/MMC Card slot
CF Card slot
Grid lines
Flash Exposure Compensation
Exposure Compensation
Flash ready light
Exposure mode/Electronic
analog exposure display/
Exposure Compensation value
- 3 -
1. Power Your Camera
Using the KODAK PROFESSIONAL DCS Pro 14n Battery
1. Charge battery, if needed, by plugging in
the KODAK PROFESSIONAL DCS Pro 14n
Charger/AC Adapter and inserting the
battery.
Full
Low
Insufficient
2. Insert the charged battery into the
battery slot on the camera and turn
the latch clockwise.
Using the KODAK PROFESSIONAL DCS Pro 14n DC Power Module
1. Insert the power module into the battery
slot on the camera and turn the latch
clockwise.
2. Connect the DC cable to the power module
and Charger/AC Adapter.
3. Plug in the Charger/AC adapter.
Power LED
Charging LED
- 4 -
Latch