Display Cable - Dell Inspiron 1012 Service Manual

1 screws (4)
Replacing the Display Panel
1. Follow the procedures in
2. Align the display panel with the display cover
3. Connect the camera cable to the connector on the camera module.
4. Replace the four screws that secure the display panel to the display cover.
5. Replace the display bezel (see
6. Replace the display assembly (see
CAUTION:
result in damage to the computer.
Display Cable
Removing the Display Cable
1. Follow the procedures in
2. Remove the display assembly (see
3. Remove the display bezel (see
4. Remove the display panel (see
5. Turn the display panel over and place it on a clean surface.
6. Pull the pull-tab as shown in the illustration to disconnect the display cable from the connector on the display panel.
Great user manuals database on
2 display panel
Before You Begin.
Replacing the Display
Replacing the Display
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
Before You Begin.
Removing the Display
Removing the Display
Removing the Display
UserManuals.info
Bezel).
Assembly).
Assembly).
Bezel).
Panel).