Removing The I/O Board - Dell Inspiron 11 Service Manual

Back to Contents Page
I/O Board
Dell™ Inspiron™ 11 Service Manual
Removing the I/O Board
Replacing the I/O Board
WARNING:
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
is not covered by your warranty.
CAUTION:
surface (such as a connector on your computer).
CAUTION:
computer.
Removing the I/O Board
1. Follow the procedures in
2. Remove the battery (see
3. Remove the keyboard (see
4. Remove the palm rest (see
5. Disconnect the speaker cable from the speaker cable connector on the I/O board (see
6. Remove the hard drive (see
7. Remove the memory module (see
8. Remove the palm rest bracket (see
1 I/O board cable
3 screw
9. Remove the screw that secures the I/O board to the computer base.
10. Disconnect the I/O board cable from the I/O board cable connector.
11. Lift the I/O board out of the computer base.
Great user manuals database on
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
To help prevent damage to the system board, remove the main battery (see
Before You Begin.
Removing the Battery).
Removing the Keyboard).
Removing the Palm Rest).
Removing the Hard Drive).
Removing the Memory
Removing the Palm Rest
2 I/O board cable connector
4 I/O board
UserManuals.info
Removing the
Removing the
Module).
Bracket).
Battery) before working inside the
Speakers).