Replacing the Memory and Processor Board
1. Follow the procedures in
2. Align the notch in the memory and processor board with the tab in the connector.
3. Slide the memory and processor board firmly into the slot at a 30-degree angle, and press the memory and processor board down until it clicks into
place. If you do not hear the click, remove the memory and processor board and reinstall it.
4. Replace the four screws that secure the memory and processor board to the system board.
5. Replace the processor heat sink (see
6. Replace the palm rest bracket (see
7. Replace the memory module (see
8. Replace the hard drive (see
9. Connect the speaker cable to the speaker cable connector on the I/O board (see
10. Replace the palm rest (see
11. Replace the keyboard (see
12. Replace the battery (see
CAUTION:
result in damage to the computer.
Back to Contents Page
Great user manuals database on
Before You
Begin.
Replacing the Processor Heat
Replacing the Palm Rest
Replacing the Memory
Replacing the Hard
Drive).
Replacing the Palm
Rest).
Replacing the
Keyboard).
Replacing the
Battery).
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
UserManuals.info
Sink).
Bracket).
Module).
Replacing the
Speakers).