Table of Contents
Advertisement
4. Starting and operation
4.1 Before mounting
Check that a fully assembled transmitter has been delivered.
Examine the device for any transport damage that may have occur-
red. If such damage is present, notify the transport company and
supplier immediately.
Keep the packaging as it offers optimal protection during transport.
Make sure that the housing and the connection contacts are not
damaged.
4.2 Assembly / Installation / Configuration
- The extremely low power consumption allows the units to be mounted side by
side with no air gap between them, even at an ambient temperature of 60°C.
Calibration and adjustment
During the calibration and adjustment, the measurement and the connection of exter-
nal voltages must be carried out in accordance with this manual, and the technician
must use tools and instruments that are safe from the point of view of safety.
Operation in normal mode
The operating personnel may only adjust or operate the device if these are installed
in a reasonable manner in control panels or similar, so that the operation does not
entail any danger to life or material. This means there must be no risk of contact and
the device must be placed in such a way that it is easy to use.
5. Configuration module/ front display UMU-FD 2
•
Programming front for universal transmitter UMU 100
•
Monitoring of process values and status via the built-in display
•
Scroll help texts in 7 languages
Applications
•
Communication interface for programming and adjusting the operating parame-
ters of the UMU 100.
•
The easy-to-read display can be used to monitor the process signals, to simulate
the output signal and to display sensor errors and internal device errors.
•
Can be plugged from one UMU 100 to the next to transfer the data from the first
transmitter to the next.
•
If the device is integrated in the process, the display shows the corresponding
process values and the respective process status.
promesstec GmbH I Niedersachsenstraße 4 I D- 48465 Schüttorf I Tel.:+49 (0)5923/ 90 229 0 I Fax:+49 (0)5923/ 90 229 29
E-Mail: office@promesstec.com I Internet: www.promesstec.com
8
Advertisement
Table of Contents
