Table of Contents
Advertisement
4.
Commissioning and operation
4.1 Before mounting
Check whether a complete digital display has been supplied.
Inspect the device for any transport damage that may have
occurred. If such damage is present, notify the carrier and supplier
immediately. Keep the packaging, as it provides optimum protection
during transport. Make sure that the housing and the connection
contacts are not damaged.
4.2 Calibration and adjustment / operation in normal mode
Calibration and adjustment
During calibration and adjustment, the measuring and connection of external
voltages must be carried out according to the specifications of this manual. The
technician must use tools and instruments that are safe to use.
Normal operation
Operators are only allowed to adjust and operate devices that are safely fixed in pa-
nels injury and damage. This means there is no electrical shock hazard, and the de-
vice is easily accessible.
promesstec GmbH I Niedersachsenstraße 4 I D- 48465 Schüttorf I Tel.:+49 (0)5923/ 90 229 0 I Fax:+49 (0)5923/ 90 229 29
E-Mail: office@promesstec.com I Internet: www.promesstec.com
8
Advertisement
Table of Contents
