Table of Contents
Advertisement
Warning!
Possibly a dangerous situation can occur, which results in burns be-
cause of hot surfaces or liquids, if not avoided.
Warning!
This device is designed for connection to life-threatening electrical
voltages. Disregarding this warning can lead to severe injuries or me-
chanical destruction. To avoid the risk of electric shock or fire, the sa-
fety rules in the manual must be observed and the instructions follo-
wed. The specification values must not be exceeded and the device
may only be used in accordance with the following description. Read
the manual carefully before using the device. Only qualified persons
(technicians) are allowed to install this device. If the device is not
used as described in this manual, the protective devices of the de-
vice will be impaired.
Warning!
Before the device has been permanently installed, no dangerous
voltage may be connected to it, and the following measures should
only be carried out when the device is de-energized and under ESD-
safe conditions:
- Installation, assembly and disassembly of lines.
- Troubleshooting the device.
Warning!
The front panel of the device must not be opened, as this could da-
mage the contacts for contacting the UMU-FD 2 front display.
The device does not contain any internal DIP switches or program-
ming bridges. The UMU 100 must be mounted on a DIN rail accord-
ing to DIN 60715.
The CE mark is the visible sign that the device complies with the re-
gulations.
Double insulation is the symbol that the device meets special insula-
tion requirements.
promesstec GmbH I Niedersachsenstraße 4 I D- 48465 Schüttorf I Tel.:+49 (0)5923/ 90 229 0 I Fax:+49 (0)5923/ 90 229 29
E-Mail: office@promesstec.com I Internet: www.promesstec.com
4
Advertisement
Table of Contents
