Table of Contents
Advertisement
Configuration module/front display UMU-FD
2
1. General
1.1 Information
- These operating instructions give important information on how to use the mea-
suring instrument. A prerequisite for safe working is compliance with all specified
safety instructions.
- The qualified personnel must have read and understood these operating instruc-
tions before installing and commissioning the sensor.
- These operating instructions are part of the product. Therefore, keep them in a
place that is accessible to all users at all times, close to the place of use.
- The local regulations and safety regulations that apply to the sensor's area of
application must be observed.
- If the serial number on the nameplate is no longer legible (e.g. due to mechanical
damage), traceability is no longer ensured.
- The sensors described in the operating instructions are developed and manu-
factured according to the latest knowledge. All components are subject to strict
quality and environmental criteria during production.
- The manufacturer is not liable if damage occurs as a result of improper use, non-
observance of these operating instructions, use of insufficiently qualified specia-
list personnel and unauthorized modifications to the sensor.
1.2 Drawings, shortcut
Warning!
A non-observance can cause injuries to persons and/or the demoli-
tion of the device. There can be a dangerous to life.
Attention!
A non-observance can cause a faulty operation of the device or lead
to property damage.
Info!
A non-observance can have influence on the operation of the device
or cause unintentional reactions of the device.
Danger!
When not observing the safety instructions, there is a risk of serious
or fatal injuries caused by electrical power.
promesstec GmbH I Niedersachsenstraße 4 I D- 48465 Schüttorf I Tel.:+49 (0)5923/ 90 229 0 I Fax:+49 (0)5923/ 90 229 29
E-Mail: office@promesstec.com I Internet: www.promesstec.com
3
Advertisement
Table of Contents
