Page 1
2022 HONDA NAVI UPSWEEP FULL EXHAUST SYSTEM BLACK PART# 48241 Congratulations, you have purchased the finest exhaust system available for your motorcycle. Your Vance & Hines exhaust is designed and crafted for performance, quality, and style. Please follow the instructions below, check exhaust system for missing or damaged parts and if you need any assistance please contact our technical support line (562) 921-7461.
Page 2
HARDWARE TOOLS REQUIRED Allen Wrench: 4mm Sockets: 10mm, 14mm, 15mm Ratchets: 1/4”, 3/8” Extentions: 1/4”DR EXT Bar 6” 3/8 ”DR EXT Bar 6” STOCK SYSTEM REMOVAL 1. Remove the two cylinder exhaust port nuts from head pipe, located at the cylinder head.
Page 3
VANCE & HINES SYSTEM INSTALLATION 1. Install mounting bracket (1275-P) using supplied M10 bolts (A949HW). (Do not fully tighten at this time). 2. Install exhaust using stock exhaust port nuts. (Do not fully tighten at this time). 3. Fasten exhaust to mounting bracket using the two supplied 1/4-20 screws (A304HW). 4.
Page 4
Emissions Notice: In California, in order to meet Air Resources Board emissions requirements, certain aftermarket part applications have been identified as replacements, and others have received ARB Executive Orders. All other emissions related aftermarket parts are for competition use only. A list of replacement parts and EO parts, and corresponding fitment is provided at vanceandhines.com/California.