Advertisement
7
Installing the Discharge
and Cover Plate
Parts needed for this procedure:
1
Discharge plate
1
Cover plate
2
Carriage bolt (3/8 x 1-1/4 inches)
1
Carriage bolt (5/16 x 7/8 inch)
2
Small flange nut (3/8 inch)
1
Flange nut (5/16 inch)
2
Large flange nut (3/8 inch)
2
Carriage bolt (3/8 x 1 inch)
Procedure
1.
Install the discharge plate to the outside of the
mounting bracket with 2 carriage bolts (3/8 x
1-1/4 inches) and 2 small flange nuts (3/8 inch)
as shown in
Figure
2.
Install the tab to the inside of the mower deck
with 1 carriage bolt (5/16 x 7/8 inch) and 1 small
flange nut (5/16 inch) as shown in
7.
Figure
7.
1. Carriage bolt (3/8 x 1-1/4
inches)
2. Discharge plate
3. Small flange nut (3/8 inch)
3.
If you have the slot shown in
cover plate using 2 carriage bolts (3/8 x 1 inch)
and 2 large flange nuts (3/8 inch).
1. Carriage bolt (3/8 x 1 inch) 3. Large flange nut (3/8 inch)
2. Cover plate
7
Figure 7
4. Carriage bolt (5/16 x 7/8
inch)
5. Flange nut (5/16 inch)
6. Ensure that the tab is
positioned inside the
mower deck.
Figure
8, install the
Figure 8
g010685
g010702
Advertisement
