Advertisement
4
Removing the Deck Fasteners and Discharge Baffle
For Z Master 4000 Mower Decks
No Parts Required
Procedure
Remove the 6 carriage bolts (3/8 x 7/8 inch), 6 locknuts (3/8 inch), and discharge baffle from the mower
deck
(Figure
4).
After removing the discharge baffle, install the 2 carriage bolts (3/8 x 7/8 inch) and 2 locknuts (3/8 inch) back
into the mower deck
(Figure
Retain the fasteners and discharge baffle for converting back to side discharge.
1. Locknut (3/8 inch)
2. Carriage bolt (3/8 x 7/8 inch)
4).
Figure 4
3. Discharge baffle
5
g361132
Advertisement
