Advertisement
General information
The PMSA (paper moisture single sheet analyzer) is a measuring
system for determining the water content of single sheets of paper.
The system consists of a moisture sensor and an analyzing
software for a PC.
Software start-up
The delivery contains an USB flash drive with the analysing
software PMSA. By double-clicking the file „PMSA_setup.exe" the
installer is started. With the installation, the USB driver (FTDI) is
installed automatically. Your PC needs that driver for PMSA
connection. After that the software can be started.
Hardware start-up
The measuring device has to be connected to your PC via USB
mini B connector. The driver for the virtual COM port has been
installed together with the software and should be ready for use.
Setting the correct COM port
Clicking on the button „Settings" (USB connector symbol), a
window for selecting the COM port opens.
After choosing the correct COM port,
the connection between hardware
and software can be tested by
clicking the button „Test". If the test
was successful, this is shown by a
popup window and by the LED status
bar shining in blue. Then click the
"Save" button.
version 1.3_en
page 3
Advertisement
