Advertisement
Export measurements:
Clicking the Export button, the export of CSV, HTML or XML formats is
possible. All measuring data shown in the list below is exported. If a
filter is set, only the filtered data is exported.
Determination of reference water content
The PMSA determines the water content, which means that it
calculates the moisture referred to the total mass (EN ISO 287).
Exemption from liability
For misreading's and wrong measurements and of this resulting
damage we refuse any liability. This is a device for quick determi-
nation of moisture. The moisture depends on multiple conditions
and multiple materials. Therefore, we recommend a plausibility
check of the measuring results. Each device includes a serial
number and the guarantee stamp. If those are broken, no claims
for guarantee can be made. In case of a faulty device, please
contact Schaller GmbH (www.humimeter.com) or your dealer.
version 1.3_en
Mn:
Mass of the sample before drying
Mt:
Mass of the dried sample
%WG: Calculated water content
page 11
Advertisement
