Advertisement
1. Have "T0E** " indicated on display, and move the optical pickup
to the most inside (only when a MD cartridge type laser power
meter is used).
2. Set the laser power meter.
[For use of stick type laser power meter.]
2-1 Uncover the laser power meter. (as shown in
2-2 Locate the sensor of the laser power meter right over above
the optical pickup (horizontally at a level of the disc position). (as
shown in
[For use of MD cartridge type laser power meter.]
2-1 Set the laser power meter and close the disc cover, fix it with
tape as not to open. (as shown in
3. Press the PLAY key of the remote controller ("T0E** " changes to
"LD " of the LCD).
4. Press the
of the LCD).
Great user manuals database on
Fig. 7
)
key of the remote controller ("LD " changes to "LP "
UserManuals.info
Fig. 8
)
Fig. 6
Fig. 7
Fig. 8
Fig. 6
)
Advertisement
