Related Manuals for Ametek SurgeX SX2200 Series
Summary of Contents for Ametek SurgeX SX2200 Series
- Page 1 SX2200 Series Electronic Systems Protection, Inc 8001 Knightdale Blvd. Suite 121 INSTALLATION INSTRUCTIONS Knightdale NC 27545 © 2019 AMETEK Electronic Systems Protection UM-SX2200-Rev-B surgex.com...
-
Page 2: Important Safety Instructions
WEEE) The symbol on the product or its packaging indicates that this product may not be treated as regular household waste. It should be returned to the retailer where the product was purchased or local collection systems should be used to ensure environmentally safe recycling. © 2019 AMETEK Electronic Systems Protection UM-SX2200-Rev-B surgex.com... -
Page 3: Installation Instructions
5 Watts maximum. LED type lamps can be used with the models). Plug the equipment into the always-on and switched RL but the dimmer must be set fully clockwise. AC outlets as needed to power the equipment. © 2019 AMETEK Electronic Systems Protection UM-SX2200-Rev-B surgex.com... - Page 4 1 and 2. • Connect an applied DC voltage to pins 2 and 3. The positive must be connected to pin 2 and the negative must be connected to pin 3. © 2019 AMETEK Electronic Systems Protection UM-SX2200-Rev-B surgex.com...
- Page 5 Illuminated: wrong; Off: correct Polarity indicator (near the supply cord) Location Indoor Number of ports ≤ 1% Voltage regulation Operation temperature and humidity: -40 - +35°C, 30-90% Importer: XXXX; Address:XXXX. Made in China © 2019 AMETEK Electronic Systems Protection UM-SX2200-Rev-B surgex.com...