Grounding Instructions - Greenlee Super Tugger 6000 Series Instruction Manual

Grounding Instructions

120 Volt Model
Electric shock hazard.
• Do not modify the plug provided
with the tool.
• Connect this tool to a grounded
receptacle on a 20-amp GFCI-
protected circuit.
Failure to observe these warnings
could result in severe injury or death.
This tool must be grounded. In the event of a malfunc-
tion or breakdown, an electrical ground provides a path
of least resistance for the electric current. This path of
least resistance is intended to reduce the risk of electric
shock.
This tool's electric cord has a grounding conductor and
a grounding plug as shown. Do not modify the plug.
Connect the plug to a corresponding receptacle that is
properly installed and grounded in accordance with all
national and local codes and ordinances. Do not use an
adapter.
20 Amp/125 Volt
Plug and Receptacle
Plug
Greenlee Tools, Inc.
6000-Series Super Tugger
220 Volt Model
This tool must be grounded. In the event of a malfunc-
tion or breakdown, an electrical ground provides a path
of least resistance for the electric current. This path of
least resistance is intended to reduce the risk of electric
shock.
This tool's electric cord has a grounding conductor and
a grounding plug as shown. Do not modify the plug.
Connect the plug to a corresponding receptacle that is
properly installed and grounded in accordance with all
national and local codes and ordinances. Do not use an
adapter.
Receptacle
6
Electric shock hazard.
• Do not modify the plug provided
with the tool.
• Connect this tool to a grounded
receptacle on a 10-amp GFCI-
protected circuit.
Failure to observe these warnings
could result in severe injury or death.
10 Amp/250 Volt
Plug and Receptacle
Plug
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
Cable Pullers
®
Receptacle