Table of Contents
Advertisement
10.1.3 Input / outputs
Table 20: Input/output parameters
Parameter
Description
1-3
Inputs/outputs
1-3-1
Analog inputs
Note: To change a function, the
function first has to be removed by
changing it to 'No function'. To set a
function all pumps have to be set to
"Manual OFF" (2-2).
1-3-1-1
Input 1
1-3-1-2
Input 2
1-3-1-3
Input 3 (extension board)
1-3-2
Analog outputs
Note: To change a function, the
function first has to be removed by
changing it to 'No function'. To set a
function all pumps have to be set to
"Manual OFF" (2-2).
1-3-2-1
Output 1
1-3-2-2
Output 2
1-3-3
Digital inputs
Note: To change a function, the
function first has to be removed by
changing it to 'No function'. To set a
function all pumps have to be set to
"Manual OFF" (2-2).
Value range and dependencies
-
-
-
No function
Pressure sensor on suction side
Pressure sensor on discharge side
Pressure sensor at tank
Setpoint
-
-
None
Pump speed
Suction-side pressure
Discharge-side pressure
Tank-filling proportional valve
Tank-filling additional proportional valve
Tank level height
-
-
Factory setting
Access level Read
-
Everybody
-
Everybody
-
Everybody
None
Everybody
-
Everybody
-
-
None
Everybody
-
Everybody
-
-
Access level Write
Re-start
required
Nobody
-
Nobody
-
Nobody
-
Service
-
Nobody
-
-
-
Service
-
Nobody
-
-
-
Advertisement
Table of Contents
Need help?
Do you have a question about the dp-control III and is the answer not in the manual?
Questions and answers