Alterations to this product, misuse of this product, or failure to follow instructions may result in serious injury or death. IMPORTANT Questions regarding the use, care, or suitability of this equipment for your application? Contact Safewaze. IMPORTANT Record identification information before using this product.
Use of this equipment for any other purpose, such as material handling, sports activities, or other action not described in these User Instructions is not approved by Safewaze. Use of this equipment in a manner outside the scope of those covered within this Manual can result in serious injury or death.
SETUP The structure to which the FS-EX2510 is attached must be capable of withstanding forces generated in the event of a fall and must meet specifications for fall protection anchorages as defined by OSHA.
TO PREVENT SERIOUS INJURY: Operation of the FS-EX2510 inolves more than pulling the lever. The use of the FS-EX2510 Come-A-Long is subject to certain hazards that are specific to this type of equipment. The user should be familiar with the controls and function of this equipment and any hazards related to such use.
Step 3: Slide the Pawl Spring from the Engaged Step 4: Hold handle firmly towards the Load Position to the Disengaged Position. This will Hook end of the FS-EX2510. Depress the Stop hold the Drive Pawl clear of the Ratchet. Pawl Trigger and simultaneously pull desired amount of cable from the device.