Dual 6.5" Surround Loudspeaker
Adopting a completely new cabinet and driver
layout that is similar to the Klipsch THX
KS-525-THX surround speaker, the RS-62
establishes greater output, improved coverage and
increased power handling to further extend
Klipsch's
best-in-class
performance.
Exclusive Tractrix
Horns have always been the
®
key component of the Reference Series. In the
RS-62, this technology has been refined to include
improved throat geometry for a more genuine,
lifelike sound. Behind the speaker's dual horns lie
1-inch titanium tweeters with large ceramic motor
structures to provide a unique combination of
precision, clarity and effortless power.
The RS-62 employs dual 6.5-inch woofers for a
solid bass foundation. These Cerametallic™
woofers with inverted copper dust caps exhibit a
very high stiffness-to-mass ratio and superb
damping characteristics.
Klipsch Wide Dispersion Surround Technology™
(WDST) provides crystal-clear sonic detail even
in listening areas with less than ideal configurations.
The Tractrix Horns deliver a 90-degree wide by
60-degree high dispersion pattern. By aligning two
horns at 90-degrees with respect to each other,
WDST smoothly covers a 180-degree horizontal
arc. In other words, the surround sound is pointed
at you no matter where you are seated.
While increased baffle ribbing around the horn
mouth dramatically improves acoustics across the
sonic range, the crossover utilizes Klipsch custom
internal wiring and the finest components to
provide signal purity and perfect driver integration.
Available in a matte black vinyl finish, the RS-62
also features side-firing ports to eliminate
turbulence noise and back-panel keyholes and
1/4" threaded inserts to simplify installation. A low-
diffraction, magnetically attached grille further
accentuates the elegance of this speaker.
• Ultra-high-performance surround speaker
Ultra2
®
• WDST
• Clean, contemporary shape for minimal room intrusion
surround
sound
S P E C I F I C A T I O N S
FREQUENCY RESPONSE
POWER HANDLING
SENSITIVITY
NOMINAL IMPEDANCE
HIGH FREQUENCY DRIVERS
HIGH FREQUENCY CROSSOVER
LOW FREQUENCY DRIVERS
ENCLOSURE TYPE
HEIGHT
WIDTH
DEPTH
MOUNTING
WEIGHT
FINISH
RS-62
™
design for maximum coverage and ease of placement
50Hz-23kHz ± 3dB
150W RMS / 600W Peak
97dB @ 2.83V / 1m
8 ohms compatible
Dual 1" (2.54cm) Titanium diaphragm
compression drivers mated to 90x60 square
®
Tractrix
Horns
2000Hz
Dual 6.5" (16.5cm) Cerametallic
cone woofers
Bass-reflex via quad side-firing ports
15" (38.1cm)
14.75" (37.5cm)
9.75" (24.8cm)
Keyhole bracket and dual 1/4"-20
threaded inserts
28lbs (12.7kg)
Matte Black vinyl
www.klipsch.com
1-800-KLIPSCH
All specifications are subject to change without notice. ©2006
™
Need help?
Do you have a question about the RS-62 and is the answer not in the manual?
Questions and answers