Disassembly Procedures - Panasonic SDR-H250E Service Manual

SDR-H250E / SDR-H250EB / SDR-H250EE / SDR-H250EF / SDR-H250EG / SDR-H250EP / SDR-H250GC / SDR-H250GN / SDR-H258GK
8.3.

Disassembly Procedures

Flow-Chart for Disassembly Procedure
No. Item/Part
1 Rear Case Unit Fig. D2
2 Operation Unit
3 Front/ Top Case
Unit
4 Side R/ LCD
Unit
5 Lens Unit
6 Main/Camera
P.C.B.
7 Front P.C.B.
8 Open Switch/
Side R P.C.B.
9 LCD B/L P.C.B. Fig. D12
Fig. Removal
(Screw,Connector,Flex. &
Other)
Open the LCD Unit and Jack
Cover.
7-Screws (A)
1-Connector FP11
Rear Case Unit
Fig. D3 2-Screws (B)
4-Tabs
1-Connector FP61
Operation Unit
Fig. D4 4-Hooks
1-Connector P2502
Head Disk Drive, HDD
Cushion, Top Case
3-Screws (C)1-Connector B21
HDD Relay P.C.B.
Fig. D5 3-Screws (D), 2-Screw (E)
1-Tab
2-Connectors FP63,FP6501
Front/ Top Case Unit
Fig. D6 2-Screws (F)
2-Connectors FP62,FP81
Side R/ LCD Unit
Fig. D7 2-Screws (G)
2-Connectors FP31,FP71
Lens Unit
Fig. D8 1-Screw (H)
Bottom Angle Unit
Fig. D9 2-Screws (I)
Main Shield Plate A
1-Connector B53
Camera P.C.B.
2-Screws (J)
Main P.C.B.
Fig. D10 4-Screws (K)
Front Earth Angle, Front
P.C.B.
Fig. D11 2-Screws (L)
Speaker Fixing Angle
1-Connector P6301
Speaker
5-Screws (M)
Open Switch P.C.B., Side R
P.C.B.
Note:
When fixing the Open SW
P.C.B. and Side R P.C.B.,
open the LCD Unit and SD
Cover. If you fix them without
opening, both the Open SW
(SW8301) and SD Det. SW
(SW6305) will be damaged.
Turn the LCD Case to the
arrow direction so that the
screws can be seen, and
remove the 2 screws (N).
6-Tabs
LCD Case (Upper)
1-Connector FP8101
LCD Case (Lower) Unit
Fig. D13 1-Connector FP8102
1-Screw (O)
3-Tabs
LCD B/L P.C.B.
30