10 Sms Commands - Kamstrup GSM8i 3G Installation And User Manual

10 SMS commands

NOTE: SMS commands must be sent in either capital or small letters. Capital
letters and small letters must not be mixed in the same SMS command.
READ_METER - for reading a direct meter (e.g. Kamstrup 382 or 162)
Syntax
Example
Return reply, correct
Meter No. 10101010 is read, the
meter reading value is 32432 kWh,
the power is 343 W, and the meter has
operated for 2452 hours.
Return reply, error
SIGNAL - for reading the signal strength
Syntax, command
Example
Return reply, correct
Displays the modem's current signal
strength on a scale from 0-4 where 4
is best. The signal strength must be
minimum 2
Return reply, error
IOSTATUS - for reading the status of relay output and status/Pulse input
Syntax
Example
Return reply, correct
Return reply, error
=READ_METER#
=READ_METER#
32432 kWh,
343 W,
2452 Hours,
Meter No: 10101010
NO RESPONSE
=SIGNAL#
=SIGNAL#
Signal: 2(0-4)LEDS, UMTS
NO RESPONSE
=IOSTATUS#
(Note that there is only one relay
output <relay1> and one input <input1>
on this module)
=IOSTATUS#
Relay1: 1 Relay2: 0
Input1: 1 Input2: 0
NO RESPONSE