Related Manuals for Kamstrup HC-003-56
Summary of Contents for Kamstrup HC-003-56
- Page 1 Installation Guide NB-IoT and 2G/4G modules HC-003-56 and HC-003-80 Kamstrup A/S • 55123402_A1_EN_12.2022...
- Page 2 In general The purpose of this guide is to describe how to mount an NB-IoT module and 2G/4G Network Module, HC-003-56 and HC-003- 80, in MULTICAL® 403, MULTICAL® 603 and MULTICAL® 803 as well as how to mount an external antenna and troubleshoot the installation.
-
Page 3: Table Of Contents
2G/4G Network Module • HC-003-80 Installation guide Contents Prerequisites Mounting of meter and antenna Mounting the module The CALL function Access to “TECH loop” Access to connection information Connecting to READy Manager Troubleshooting Kamstrup A/S • 55123402_A1_EN_12.2022... -
Page 4: Prerequisites
Once the module has transmitted data for the first time, the connection between the module and the meter is established automatically in READy. The address under Infrastructure reflects the address provided for the attached meter. Figure 2 Imported meters Kamstrup A/S • 55123402_A1_EN_12.2022... -
Page 5: Mounting Of Meter And Antenna
CALL function. 1 Mounting the module When the module has been correctly mounted, you must attach the disconnected calculator and let the meter start up correctly until KWh or MWh is shown in the display. Kamstrup A/S • 55123402_A1_EN_12.2022... -
Page 6: The Call Function
“2-Tech” and confirm by pressing the middle button to access “TECH loop”. 4 Accessing connection information 1 Press the buttons to access menu 2-101-03 and to read 2 Verify the data in the table below. out menu index 47. Kamstrup A/S • 55123402_A1_EN_12.2022... - Page 7 • 3: Good • 4: Excellent 1 Note that this information is a snapshot at one point in time. Kamstrup Support has access to log data for a thorough analysis. The antenna cable can be extended as shown in the below table. Be aware that when using the extension cables, another antenna than the standard mini triangle antenna is needed.
-
Page 8: Connecting To Ready Manager
• 6 Connection error due to low voltage • 34-35 Internal error • 7 Data delivery timeout If no connection can be established, please contact Kamstrup Support with the following information: Meter serial no. 2G/4G or NB-IoT serial no. Display index 47 and 49...