Page 2
Contents 1. General information 1.1 Detailed information 2. Hardware installation 2.1 Reset ® 3. MULTICAL I/O ports 3.1 Pulse inputs 3.2 Pulse outputs 4. Final assembly ® LON module for MULTICAL S7210-038 GB/2004-10-19/Rev.C1...
Page 3
Temperature records and power calculation are updated for every energy integration in MULTICAL (20…600 sec. interval depending on the actual water flow). Kamstrup makes a complete functional test at the factory, therefore the module is delivered Configured. Which is why the service LED will be off when voltage is supplied.
Page 4
The LON module can be used in following Kamstrup heat meters: ® MULTICAL type 66-CDE, type 66-MP and type 66-ST ® MULTICAL type 66-B Detailed information Visit to down-load http://www.kamstrup.com/download.html Xif-file, apb-file, nxe-file Installation guide DK and UK Installation guide, LonMaker for Windows...
Page 5
97 and 98 on the LON module. ® The DIN rail transformator 230/24 V, type 66-99-401 from Kamstrup can supply up to 2 pcs. MULTICAL ® / MULTICAL III with current including LON modules.
Page 6
Reset The LON module can be reset in several ways: Either when the 24 VAC/DC supply voltage is connected to the LON module (Power-On Reset) or by activating the integral "Reset" press button of the LON module. Or Lon Maker for Windows can initiate a reset. The application software of the LON module will then be initiated and restarted.
Page 7
Pulse outputs ® ® When MULTICAL / MULTICAL III is configured for both FF and GG = 00 the 2 I/O ports with the terminal numbers 101-104 function as 2 pulse outputs. The pulse outputs are used for e.g. remote reading of energy and volume pulses or for controlling a 3- ®...
Need help?
Do you have a question about the 66-0F-000-100 and is the answer not in the manual?
Questions and answers