Prolight DC20 User Manual page 79

DC20 - DC21 - DC22
37
- 9 - INTERFACE MANAGEMENT
With this option, you can choose a DMX universe for each output of each interface or change an input
into output. The software manage until 6 DMX universes, it is about 6xx512 or 3072 DMX channels. Each
interface can control at least 512 output. Some interfaces manage 512 additional outputs. This input can
be changed into output easily. It is the case of the interface with hardware internal memory, 2 XLR and a
build in real time clock. This interface can manage 2 x 512 output so it has 1024 channels. So three interfaces
connected to 3 USB ports can give you 3x1024 (3072) DMX channels. To open the interface management
window, you need to check in the TOOL menu of the software and start the INTERFACE option.
You can see the information below:
• Type of communication with the PC (USB / Ethernet).
• Type of interface connected.
• Serial number of the interface.
• Firmware version.
• DMX Input and Output.
• Used DMX universe.
You just need to click on the DMX input and choose the mode (input or output). After that assign the uni-
verse to the output.