Prolight DC20 User Manual page 59

DC20 - DC21 - DC22
17
• TIME of 1 loop of the scene.
• TOTAL TIME of the scene.
• Add a FADE and WAIT TIME to the scene. For Live mode only.
4.4 Drag and Drop
It is possible to move Scenes and Steps directly with the mouse. Select a scene, left click and hold it, move
the mouse with the scene and release the click.
4.5 Multi selection and control
With SHIFT and CTRL keyboard keys you can select several scenes and several steps. You need to keep
holding the key. SHIFT key will select everything from the first selected object until the last one. CTRL will
select the chosen one. When you select several steps, all the actions done with the control windows will be
applied directly to the step. It is the same if several scenes are selected.
4.6 Triggering priority between scenes
The software allows you to trigger several scenes simultaneously. When you program you scenes, you need
to care about few rules to avoid any conflict when you will trigger the scenes in LIVE mode.
The last triggered scene will take the priority. The priority will be taken only to the channels that you pro-
grammed in EDITOR mode. A channel that you programmed can take the priority on the previous one. A
channel has the priority if its DMX level is different from zero at least for one step of the scene. If a channel
has all its DMX values equal to zero in all the steps of the scene, the software will never play the channel.