Table of Contents
Advertisement
5.2 Basic parameters
5.2.1
LG (Changing the language)
Command
LG
Either German or English can be selected for the help texts.
CAUTION: After changing the language settings, the ID button in the menu bar (WPC-300) must be
pressed (module identification).
5.2.2
MODE (Parameter view)
Command
MODE
This command changes the operating mode. Various commands (defined via STD/EXP) are blanked out in
Standard Mode. The commands in Expert Mode have a more significant influence on system behavior and
should accordingly be changed with care.
5.2.3
FIXCURR (Fix output value)
Command
FIXCURR
This command changes the operating mode. Various commands (defined via STD/EXP) are blanked out in
Standard Mode. The commands in Expert Mode have a more significant influence on system behavior and
should accordingly be changed with care.
5.2.4 CTRLMODE (Control function)
Command
CTRL
Switching the control function between OL (open loop) for direct control of the solenoid current and
CL (closed loop) for using extended PID controller with feedback sensor.
Page 19 of 34
Parameters
x
x= DE|EN
Parameters
x
x= STD|EXP
Parameters
x
x= -10000... 10000
Parameters
x
x= OL|CL
PQP-171-P
Unit
Group
-
STD
Unit
Group
-
STD
Unit
Group
0.01 %
STD
Unit
Group
-
STD
05.06.2020
Advertisement
Table of Contents
