Advertisement
Ph 07 3348 8082
E sales@baintech.com.au
'The Power Systems Experts'
Step 4 – Connect the batteries to the Baintech Ultimate Off-Grid Board
The next step is to connect your batteries to the board. This can be done by connecting the
supplied cables, with the red cable labelled "Battery +" to be connected to the positive
terminal on the left of the battery bank, and the black cables labelled "Battery -" should be
connected to the negative terminals on the right side of the battery bank. (Ensure the black
negative cables are connected LAST). Once the batteries are connected to the board, you can
turn the battery switch on and you're all set up to go on your next outdoor adventure!!
www.baintech.com.au
Advertisement
