Advertisement
Ph 07 3348 8082
E sales@baintech.com.au
'The Power Systems Experts'
Step 2 – Mounting and Connecting the Victron Multiplus
The next step is mounting and then connecting your Victron Multiplus to the Power Board.
The Multiplus should be mounted as per specifications provided in the provided Multiplus
Manual, which is either flat on the ground or vertical with the use of the provided mounting
bracket. Once mounted, you can then connect the board to the Multiplus. This can be done
through the supplied cables, with the red cable labelled "To Inverter +" to be connected to the
positive of Multiplus, and the black cable labelled "To Inverter -" should be connected to the
negative of the Multiplus. It should look something like the following diagram.
To connect the AC In & Out to the unit, please consult a licensed electrician. UNDER NO
CIRCUMSTANCES SHOULD THE AC IN & OUT BE CONNECTED BY UNQUALIFIED PERSONNEL,
ONLY BY A LICENSED ELECTRICIAN.
www.baintech.com.au
Advertisement
