Advertisement
Quick Links
Ph 07 3348 8082
E sales@baintech.com.au
'The Power Systems Experts'
Baintech Ultimate Off-Grid Board Quick Start
Congratulations on purchasing the Baintech Ultimate Off-Grid Board, the all-in-one solution for
your off-grid adventures! Our ultimate Off-Grid Board is Powered by Victron Energy products and
features DC-DC Charging, Solar Charging and shore power for your battery bank. It also features
an inverter for 240v appliances and air conditioning. All of this is protected with circuit breakers,
fuses and low voltage cut-outs. The entire system is then controlled and monitored through either
the Touch Panel or through your Smartphone via Bluetooth.
This is a simple Quick Start guide to get your system installed and to get you adventuring as soon as
possible.
www.baintech.com.au
Advertisement
Summary of Contents for Baintech Power Board 3000 Ultimate
- Page 1 ‘The Power Systems Experts’ Baintech Ultimate Off-Grid Board Quick Start Congratulations on purchasing the Baintech Ultimate Off-Grid Board, the all-in-one solution for your off-grid adventures! Our ultimate Off-Grid Board is Powered by Victron Energy products and features DC-DC Charging, Solar Charging and shore power for your battery bank. It also features an inverter for 240v appliances and air conditioning.
-
Page 2: Step 1 - Mounting The Board
Ph 07 3348 8082 E sales@baintech.com.au ‘The Power Systems Experts’ Step 1 – Mounting the board The first step is mounting the Power Board in the desired location in your canopy/camper. You will need to drill your own mounting points on the board, we have left space on each of the 4 corners to do so (red dots on the diagram below). - Page 3 Ph 07 3348 8082 E sales@baintech.com.au ‘The Power Systems Experts’ Step 2 – Mounting and Connecting the Victron Multiplus The next step is mounting and then connecting your Victron Multiplus to the Power Board. The Multiplus should be mounted as per specifications provided in the provided Multiplus Manual, which is either flat on the ground or vertical with the use of the provided mounting bracket.
- Page 4 Step 3 – Connect the Baintech 110aH Lithium batteries in Parallel The next step is to run your supplied Baintech Lithium Batteries in parallel. This can be done by connecting the supplied cables, with the red cables labelled “Parallel +” to be connected to the positive terminals of all 3 batteries, and the black cables labelled “Parallel -”...
- Page 5 E sales@baintech.com.au ‘The Power Systems Experts’ Step 4 – Connect the batteries to the Baintech Ultimate Off-Grid Board The next step is to connect your batteries to the board. This can be done by connecting the supplied cables, with the red cable labelled “Battery +” to be connected to the positive terminal on the left of the battery bank, and the black cables labelled “Battery -”...
- Page 6 Ph 07 3348 8082 E sales@baintech.com.au ‘The Power Systems Experts’ Anderson Connection Summary In the above picture, the round zoomed-in photo of the Anderson plugs has a detailed description of what each Anderson plug is for Solar (Red Anderson): to connect the system via your unregulated solar input DC-DC (Blue Anderson): to connect the system via your Vehicles Starter Battery/Alternator Non-critical (Single Grey Anderson): this is for your accessories that don’t matter if they...
- Page 7 Ph 07 3348 8082 E sales@baintech.com.au ‘The Power Systems Experts’ Links to product manuals Victron SmartSolar 100/50 MPPT: https://www.victronenergy.com/upload/documents/Manual_SmartSolar_MPPT_100- 30__100-50/MPPT_solar_charger_manual-en.pdf Victron Orion-TR Smart 12/12-30 DC-DC Charger: https://www.victronenergy.com/upload/documents/Orion-Tr_Smart_DC-DC_Charger_- _Isolated/Orion-Tr_Smart_DC-DC_Charger-en.pdf Victron Cerbo GX: https://www.victronenergy.com/upload/documents/Cerbo_GX/GX_Device_Manual- en.pdf Victron GX Tank: https://www.victronenergy.com/upload/documents/GX_Tank_140/GX_Tank_140-en.pdf Victron Smart Battery Protect: https://www.victronenergy.com/upload/documents/Manual-Smart-Battery-Protect-12V-...