Advertisement
Ph 07 3348 8082
E sales@baintech.com.au
'The Power Systems Experts'
Step 1 – Mounting the board
The first step is mounting the Power Board in the desired location in your canopy/camper.
You will need to drill your own mounting points on the board, we have left space on each of
the 4 corners to do so (red dots on the diagram below). Then securely mount the board in the
desired location. The board can only be mounted vertically or flat on the ground, under NO
circumstances should the board be mounted facing down.
www.baintech.com.au
Advertisement
