Advertisement
Ph 07 3348 8082
E sales@baintech.com.au
'The Power Systems Experts'
Step 3 – Connect the Baintech 110aH Lithium batteries in Parallel
The next step is to run your supplied Baintech Lithium Batteries in parallel. This can be done
by connecting the supplied cables, with the red cables labelled "Parallel +" to be connected to
the positive terminals of all 3 batteries, and the black cables labelled "Parallel -" should be
connected to the negative terminals of all 3 batteries. (Ensure the black negative cables are
connected LAST). Once the batteries are connected in parallel, mount the batteries to the floor
in your desired spot.
www.baintech.com.au
Advertisement
